Collecting my attempts to improve at tech, art, and life

Ruby Babysteps 01 - First Steps

Tags: ruby learn coolnamehere

Ruby is an exciting language with a huge number of features that appeal to advanced programmers. You should not let that intimidate you, though. The language is very easy to get started with, and you can work your way into the more arcane corners.

This page is intended to provide the non-programmer with a gentle introduction to the Ruby programming language. When you are done with it, you should feel ready to learn more. You won’t be any kind of expert, but you will be able find the information you need to go farther. Beginners and experts alike should feel free to send suggestions about how to improve this tutorial.

Installing Ruby

Of course, if you want to use Ruby, you have to install it. To be honest, installation used to be the trickiest part of dealing with Ruby. It’s a lot easier to install it these days, depending on your operating system.


As with all things Linux, getting Ruby depends on your distribution. See if it is already installed on your system. If not, check to see if it’s available on your distribution discs. If that fails as well, you might as well move on to the world of compiling software yourself. See a little further below for details.

Mac OS X

OS X users have it good. Sort of. A fairly recent Ruby is already available on the Developer Disk for OS X, so you don’t need to mess with any of that other stuff to get started. It’s likely that you will want to later on, but you’ve got enough to get you started. Definitely more than you’ll be needing with this tutorial!

See below if you are willing to enter the world of compiling your own software. It is not as bad as it sounds, trust me.


Users of Microsoft Windows are definitely not used to compiling their own software. Fortunately, the RubyInstaller project provides an installer for Windows users.

Installing From Source

Okay, so there’s no “grab and install” version of Ruby available for your computer. If you are the adventurous sort, and have a C compiler handy, you might as well use the traditional UNIX approach: build it yourself!

Creating Ruby Programs

You’ll probably want to start writing programs at this point. Well, now that you have installed Ruby, all you need to do is fire up a text editor and start writing code.

As soon as you’ve been around the programming culture for a while — sometimes as long as two days - you might notice that some folks have strong opinions about which is the One True Editor, which you should use for all of your programming. That’s kind of silly, though. This early, you can probably make do with almost anything that lets you edit text. Here are a couple of my favorite popular choices:

Look around a bit and pick the one that feels most comfortable to you. If you change your mind later, nobody should hold it against you.

Hello, World

It is traditional to start programming by creating a program that displays a simple phrase, such as “Hello, World!” I am not about to argue with tradition. Type the following into your text editor:

# hello.rb
#  Displays a warm greeting

puts "Hello, World!"

Save the file as hello.rb. We’ll be running it in a few moments, but first - what’s with those first couple of lines?

Well, they’re Ruby comments. Comments start from the character #, and extend to the end of the line that you wrote them on. Ruby ignores comments, which means that you can use them to explain what is going on in your code. Comments are good. When you come back to look at a complex script after several months, you might forget what some block of code does. Having the comments there to remind you will make it that much easier to sort everything out.

I like to start every one of my scripts off with a quick header to describe the purpose of the program. Here is the rough template:

# hello.rb
#  Displays a warm greeting

Of course, your header can be as complicated as you like:

# hello.rb
#  Displays a warm greeting.
#   Brian Wisti (
# = DATE
#   9 March 2009
#   1.0
#   Demonstration script for my Ruby tutorial at
#   ruby hello.rb
#   You may copy and redistribute this program as you see fit, with no
#   restrictions.
#   This program comes with NO warranty, real or implied.

Just try to match the header complexity to the program. Using this header for a program that consists of one line of code might be just a little bit of overkill. I usually start with the two-line header and expand it as I see fit.

Now you probably would like to know how to actually run a program. Save the file you have been editing, and switch to a command line. Type the following at the command prompt:

$ ruby hello.rb
Hello, World!

That was kind of cool. It would be nice to customize it a little bit. Maybe we could change the program so that it says “Hello” to us personally.

# hello.rb
#  Displays a warm greeting.

name = "Brian"
puts "Hello, #{name}"

Save the file, and run it again.

$ ruby hello.rb
Hello, Brian!

We stored the string “Brian” in the variable name. A variable is basically just something you want the computer to remember so that you can get to it later. You can get a lot more complicated than that if you want, and a lot of programmers do. However, this definition should do for a long time.

The string itself is a special sort of variable called an object. Objects are very powerful things - so powerful that every variable in Ruby is an object. You can do a lot more with a variable than just ask the computer what the object’s value is. An object has a set of things that it knows how to do. For example: a String knows how to ask Ruby to work out a value when you place some Ruby code - such as a variable name — inside the string. The code is marked by special characters. Then it will take the value that Ruby found, and insert it where the special marker was placed. You could change the value of name and rerun the program. The correct value will be displayed in the greeting string.

name = "Matt"
puts "Hello, #{name}!"


$ ruby hello.rb
Hello, Matt!

Having a program that displays the exact same message every time you run it is nice when it comes to being consistent, but not so entertaining as a program. Let’s make things a little more interesting still. Instead of changing the value of name in the code of the program, we can use the gets method to get a name from the user.

print "What is your name? "
reply = gets
name = reply.chomp
puts "Hello, #{name}!"

Running this is a little more fun:

$ What is your name? Brian
Hello, Brian!

The gets method … wait, I used that word again, “method”. You might be wondering what that is supposed to be. A method is one thing that an object is capable of. We have to call it by name. You can’t just say “Ball, do whatever it is you do.” We have to say “Ball, bounce!” In the real world, of course, talking to the ball would not be very helpful. But you get the idea.

gets is a method that gets a line of text from the user and returns it to - or hands back to - the program. What do we do with that reply? We chomp it! gets returns all of the text it gets, including the bit that represents the ENTER key you pressed. We don’t want to keep that, though, so we need a safe way to remove the ENTER character without doing anything to the rest of the string. chomp is a method associated with Strings of text which asks the string to remove that rogue ENTER character. A cleaner copy of the string is returned for you to display.

If you don’t believe me about the ENTER character, you can test it for yourself. In the string which is printed by puts, replace name with reply. You’ll see what I am talking about.

puts "Hello, #{reply}!"

Generally, you call an object’s methods by tagging a dot and the method name at the end, like object.method. There are lots of things you can do with methods, and lots of ways to treat them, but that is beyond the scope of this article.

For now, though, you’ve learned enough to get started, and now I want you to play around with what you’ve learned and enjoy yourself a little bit.


Congratulations! You have just begun learning Ruby. You just wrote a complete program which gets input from a user, and prints output which includes a modified version of their input! Stop for a minute and think about that. Of course there’s a lot more to learn, but it’s well within your abilities. There is an ever-growing abundance of resources for the “Ruby Newbie”, and you should take advantage of as many of them as possible!

Added to vault 2024-01-15. Updated on 2024-01-26